Get the Perfect Fit with an Electric Strike for Metal Door Frame

Rate this post

In order to get the most out of an electric strike for metal door frame, it’s important to get the right size for your door frames and to choose an option that comes with the pre-drilled holes you need to install it in place. An electric strike won’t work with all metal door frames; check with the manufacturer before purchasing to avoid an incompatible product. Follow these tips and tricks when installing your new electric strike so you can get it in place fast and start using your door as normal as soon as possible.

A door strike, sometimes referred to as an electric door strike, is a device that attaches to the inside of any metal door frame and enables you to lock or unlock the door without using a key or your own hand strength to open it. The installation process of an electric strike for metal door frames can be accomplished in a couple of hours or less, but there are some steps you’ll need to follow in order to ensure that you get the perfect fit and use of the device.

What is electric strike for metal door frame?

The electric strike for metal door frames is a universal design that can be installed on steel or aluminum door frames. The electric strike will allow you to enter or exit your home or office without having to use a key. The door can also be locked and unlocked remotely, so you don’t have to get up and go outside.

An electric strike can be installed in a variety of ways, depending on your specific needs. The most common installation method is a surface-mounted application which allows for quick, easy installation.

There are two types of surface-mounted installations: flush mounted and semi-flush mounted. A flush mounted application involves placing the device onto the door’s surface, whereas a semi-flush mounted device allows for some clearance from the bottom edge of the door frame to make it easier to install wiring inside.

Why Choose an Electric Strike for Metal Door Frame?

If you’re looking for a lock that can be installed on metal door frames, look no further than electric strikes. These are designed to be installed in seconds and to fit securely on most metal door frames. Plus, they offer many of the same features as other locks, such as deadbolts and keypads.

With so many advantages, it’s easy to see why choosing electric strike for metal door frame is a great choice! They are one of the most secure types of locks, plus they don’t take up any room on your doorframe or even require any extra hardware for installation. What more could you ask for?

The Importance of a Perfect Fit

For all of your security needs, look no further than electric strike for metal door frame! The device is a universal design that can be installed on steel or aluminum door frames. With this security piece, you’ll never have to worry about doors getting stuck or swinging open without warning.

Additionally, there are two versions of this product: one that mounts on top of the door frame and another that attaches to the side. Choosing which mount is right for you depends on how your door closes. If it swings inwards when closed, then the top mounting option would work best for you.

If it swings outwards when closed, then attaching it to the side would be better suited. Be sure not to pick a location that could cause an issue with opening or closing as well!

How to Measure for an Electric Strike for Metal Door Frame

An electric strike typically comes in a few different sizes to accommodate various door widths, but you’ll want to make sure it will fit your door frame. The first step is to measure the width of your door frame. This should be done from side-to-side and include any trim work around it.

Once you have that measurement, look up the size of the electric strike that will work best on your metal door frame. Most manufacturers list this information on their website or packaging so it’s important to check before ordering one.

Next, you’ll want to measure your door. This will give you more insight into how much room you have to work with as well as help determine if it’s possible to install a strike on your current frame. You’ll need to make sure that there is enough room around all sides of your door and in between trims so it can function correctly when installed.

After you have all of your measurements, it’s time to measure how much room you have inside and outside of your door frame. First, check to make sure that you have enough room to install an electric strike for metal door frame. Most manufacturers recommend at least 3/4 clearance on each side of your door as well as between trim and framing around your doorway.

Installation Instructions

1. Determine where your electric strike for metal door frame will be installed.
2. Remove the current door knob and deadbolt and replace them with your new hardware.
3. Attach your electric strike to the frame by using screws that are included in your kit (or, if there are no pre-drilled holes, you can drill pilot holes).
4. Test that your electric strike locks and unlocks smoothly by inserting a key in your new lock set. If it does not function as desired, try unscrewing it from the frame and repositioning it until you find the perfect fit.
If your installation does not have pre-drilled holes, use a power screwdriver to drill through the appropriate hole sizes on your metal door frame.
You should now be able to attach your electric strike with the screws provided in your kit. Insert a key into your new lock set . You’re all done!

 

Leave a Comment